Inventor support at a glance
| Versions | Autodesk Inventor 2024, 2025 and 2026, tested by MecAgent's technical team |
| How it connects | A native add-in: the agent acts directly in your open Inventor session |
| Installer | The same Windows installer and the same account as for SOLIDWORKS |
| Operating system | Windows 10 or 11, 64-bit |
| Native since | November 2026 |
| Older versions | Should work, but are not tested or guaranteed |
MecAgent is its own desktop app. It runs next to the Inventor window, detects Inventor when you start it and shows the connection with a status dot: Inventor and the Agent both read "Connected" when you are ready.
What you can ask
Ask the way you would brief a colleague: what to build or change, with numbers and references.
Create a flange with 6 M8 holes, 10 mm thickness, outer diameter 120 mm.
Add four Ø5 mm through holes, 10 mm from each edge, at the corners of the plate.
Add a 2 mm fillet on every outer edge.
Apply aluminium 6061-T6 to all frame parts and update the mass.
Export every part of the assembly as STEP and PDF into one folder for the supplier.
The agent builds a plan, shows it as a live Task Progress and acts in the document you have open. You approve each tool execution, or turn on Auto-accept. Then you refine by continuing the conversation.
Requests that do not work, in Inventor as anywhere else:
- "Create a car.": a vague intent with no dimensions.
- "Rename everything.": no selection and no naming rule.
- "Make it better.": no criterion to optimize.
- An action on geometry without saying which face, edge or component: select it, or describe it precisely.
Long jobs run in the background
Background Tasks run on MecAgent's servers while Inventor stays free for you. You send a file, you get files back:
| Task | You send | You receive |
|---|---|---|
| CAD-to-Drawing | Your model | A dimensioned drawing as PDF |
| Drawing-to-CAD | A PDF or image drawing | A 3D model as STEP |
| Text-to-CAD | A written brief or a spec sheet | A 3D model as STEP |
When you start a task, choose Other CAD Software (Output: STEP.) in Deliver for. STEP models and PDF drawings open in Inventor like any other. Background Tasks start with the Starter plan.
MecAgent and Autodesk's own AI
Autodesk builds its own assistant into its products. MecAgent is an independent tool that works next to it: the two can be used together, and you do not need one to use the other.
General chatbots (ChatGPT, Claude, Gemini, Copilot) are a third category. They are not built to operate CAD software: they answer questions and draft code, but they do not see your open document or check the result of what they propose.
For a tool-by-tool comparison with sources, read AI CAD copilots compared.
What it does not do
- It does not replace the engineer. You keep design intent, validation and release.
- It does not guarantee the certification or regulatory compliance of a drawing.
- Complex freeform surfacing from a vague description is out of reach today.
- It cannot apply company rules it was never given: add your standards as General Knowledges.
Get started in three steps
- Download MecAgent for Windows and create a free account. It is the same installer as for SOLIDWORKS.
- Start Inventor 2024, 2025 or 2026. MecAgent detects it automatically.
- Type your first request, with dimensions and references.
On a company network, ask IT to allow proxy.mecagent.com on port 443.
Other Autodesk software
Autodesk Fusion (formerly Fusion 360) is not supported natively yet. Until its add-in ships, Fusion users can use the MecAgent web app: Background Tasks deliver STEP models and PDF drawings that open in any CAD software. The order of the native add-ins to come is in the user guide.
Your data
On the paid plans, MecAgent does not use your CAD files or requests to train its models. The Free plan is for non-commercial evaluation and includes data collection. The app says so before you start: a notice that cannot be skipped explains this collection, and you have to read and accept it to access the application. The details, plan by plan, are on the security and data page.